Flux-cored wire for TOOL STEELS
MF3-GF-50-ST Material No: 1.2567 48-50 HRC | C: 0.3 Cr: 2.5 | This C-. Cr-, V-. W-alloyed flux-cored wire electrode is suitable for repair and build-up applications on hot working steels of similar or lower alloyed hot working tools. The weld deposit is machinable, can be heat treated and maintains its temper up to 550°C. |
MF3-GF-55-ST Material No≈ 1.2567 53-56 HRC | C: 0.3 Cr: 2.5 Co: 2 V: 0.3 W: 7 | This C-. Cr-, V-. W-alloyed flux-cored wire electrode is suitable for repair and build-up applications on hot working steels of similar or lower alloyed hot working tools. The weld deposit is machinable, can be heat treated and maintains its temper up to 550°C. |
| MF4-GF 55-ST 57-59 HRC | C: 0,60 Cr: 4 Mo: 3.5 W: 3.5 | The wear- and heal-resistant deposit of this flux-cored wire electrode in high speed steel quality is suitable for repairing and manufacturing of hot and cold working tools. stamps and counter dies, etc. The weld deposit can be heat treated and maintains ils temper up to 550°C. |
| MF4-GF-350-ST Material No: 1.6356 approx. 35 HRc Heat treated up to 51 HRc | C: 0.03 Ni: 18 Mo: 4 Co: 12 Ti: + | This flux-cored wire electrode is suitable for surfacing tools that should be machined. The weld deposit is martensitically cured. The hardness can be increased by heat treatment. Applications include press and drawing dies, extrusion dies and forms for the aluminium and plastics industries. |