Flux-cored wire for CORROSION -RESISTANT STEELS
MF5-GF-200-PRZ 200-220 HB Material N.14015 | C:0,10 Cr: 17 | Tubular wire for plating and hoining equal and similar ferritic Cr steels and cast steels. Proper welds are subject to the recommended heat treatment. The electrode is especially suited to sealing surfaces on water, steam and gas valves for service temperature up to 450°C. Scale-resistant up to 950°C. |
MF6 GF-45-PR Annealed:Aprox.43HRC Materiale No 14115 | C:0,20 Cr: 17 | Tubular wire for plating and hoining equal and similar ferritic Cr steels and cast steels. Proper welds are subject to the recommended heat treatment. The electrode is especially suited to sealing surfaces on water, steam and gas valves for service temperature up to 450°C. Scale-resistant up to 950°C. |
MF6 GF-50-PRZ Aprox.50HRC Materiale No 14122 | C:0,35 Cr: 17 Mo:1.0 | Tubular wire for plating and hoining equal and similar ferritic Cr steels and cast steels. Proper welds are subject to the recommended heat treatment. The electrode is especially suited to sealing surfaces on water, steam and gas valves for service temperature up to 475°C. Scale-resistant up to 800°C. |
MF5-GF-400- ~E410 NiMo HB:300-600 Materiale No 14351 | C: 0.05 Si: 0.7 Mn: 0.6 Cr: 13 Ni: 4.5 Mo: 0,5 N: 0.20 | Tubular wire for plating and hoining equal and similar ferritic Cr steels and cast steels. The alloy is highly suitable for welding on tough, corrosion resitant continuous-cast rolls and also wear parts from the steel industry and large machinery. Apart from corrosion resistance, it also has a further capability in protection against cavitation, erosion and also capable of resistintg pitting. |