Aweld > FOR NICKEL -BASED ALLOYS

FLUX-CORED WIRE FOR NICKEL-BASED ALLOYS

MF32-GF-250-CKNPTZ
220-260 HB
work-hardened
approx.420 HB
C:0,08    Cr: 16           
Ni:res.     Mo: 16 
Co: 2.5.  V: 0,35 
W: 4,5    Fe: < 5
High temperature-resistant alloy for hot working tools. When first applied to hot forging dies, the overlay is very cohesive. Under impact, pressure load and high temperature, the resulting overlay increases in hardness up to 400 HB without deforming. The deposit is heat-and wear resistant and resistant to oxidizing, reducing and other corrosive media.
MF32-GF-350-CKPTZ
330-350 HB
work-hardened
35-45 HRC
C:0,05    Cr: 19          
Ni:res.     Mo: 5 
Co: 11    V: 0,3
W: 5        Ti: 3
Al:  1,7
It produces a Cr-,Co-,Mo,Ti,Al, – and W alloyed, nickel-based deposit. The weld metal is aprecipitated, easily hardened alloy with an excetional combination of hight temperature mechanical properties, formality and corrosion resistance.The alloy can be used for hot forging dies, hot working steels, hot shear blades, etc.

SG-NiCr 21 Mo 9 Nb

ERNiCrMo-3

Material No. 24831

C:0,05 Mn: 0,5
Cr: 22 Ni: res
Mo: 9 Nb: 3.5
Fe: < 5

Alloy for a wide range of appllications including hoining of dissimilar steels and repairs on cast iron. When use for hardfacing, the deposit gives up to 350HB

Top